Vases & Curios

Biomechanical Parasitic Curio

3D printable biomechanical vase STL file in frosted emerald green: four twisting tubes spiral around an open, web-like core and rise into jagged and round openings. The lower body carries a raised honeycomb pattern, and four curved claw legs lift the vase off the shelf as if it has just stepped into place. Translucent green lets light pass through the thinner walls and the lattice inside, so the piece changes with every angle. A striking conversation piece for a bookshelf, desk or console.

Torch Bloom Vase

3D printable torch vase STL file with a hammered bronze finish: a faceted, tapering shaft rises from a round base plate to a banded collar, then bursts into torn, flame-shaped petals. The inside of the petals is finished in glossy amber-red, so the opening looks lit from within, especially with an LED tea light inside. Rigid geometry below and wild, flickering edges above make it a bold centerpiece for a mantel, shelf or dining table.

Twisted Spiral Wave Vase

3D printable spiral vase STL file in a glossy cobalt-blue crackle glaze: raised ridges wind around the body like a twisting wave and finish in a slanted, asymmetric rim. A fine crackle pattern runs beneath the gloss, giving the piece the depth of hand-glazed ceramic, and a small foot ring lifts it off the surface. Sized for fresh stems or dried flowers on a shelf, sideboard or bedside table.

Interlocking Gold Ring Vase

3D printable sculptural ring vase STL file in brushed gold: interlocking torus rings, each covered in fine concentric grooves, twist around one another beneath a wide, tilted top disc. A polished inner ring at the center of the disc forms the opening for a single dried stem. The sculpture stands on a round base plate with small ball feet, and the grooves catch the light differently on every curve. A statement object for a coffee table or bookshelf.

Amethyst Candle Holder

3D printable amethyst crystal candle holder STL file: translucent purple crystal points rise around a central cup, fading from deep violet at the root to pale lavender at the tips. A rough, rocky base scattered with small crystal chips makes the cluster look freshly split from a geode. With an LED pillar candle inside, light glows softly through the crystals. A striking accent for a mantel, dining table or meditation corner.

Burgundy Bloom Cluster Vase

3D printable bud vase STL file in glossy burgundy: a cluster of slender tubes rises from a base of rounded, grape-like beads, each tube ending in its own trumpet-shaped mouth. Between the tubes, an open honeycomb lattice fills the center and lets light through. Every opening sits at a different height, so single stems and dried flowers fall into a natural, uneven rhythm. The vase stands on a thin round base plate.

Terracotta Twist Candle Holder

3D printable taper candle holder STL file with a glossy terracotta glaze: two sculpted blades twist around each other and meet at a round cup that holds a standard taper candle. The holder stands on a wide drip tray that catches wax. Streaks in the glaze follow the twist like brushwork on hand-made ceramic. A warm, modern piece for a dining table, windowsill or mantel.

Sage Spiral Glass-Insert Vase

3D printable spiral vase STL file in matte sage green: a rippled ribbon winds up from a solid base to a top collar, wrapped around a clear glass cylinder that holds the water. The textured band gives the surface a soft, velvety look, while the glass keeps the stems visible between the turns. Made for tulips and fresh flowers on a table or sideboard. The glass cylinder is not included; the sleeve is sized around a standard cylinder vase.

Amber Figure-Eight Vase

3D printable leaning bud vase STL file in translucent amber: two stacked bulbs form a figure-eight silhouette that tilts to one side on a frosted trapezoid base. The lower bulb carries spiral ribs, the upper bulb is smooth with a single groove band, and the neck ends in a small pouring lip. Light passes through the amber like coloured glass. Perfect for daisies or a few wildflower stems on a shelf or windowsill.

Violet Stacked Ring Vase

3D printable stacked ring vase STL file in metallic violet: tapering rings rise from a wide base to a narrow neck, each with its own surface: brushed, mirror-polished, hammered, fine-ribbed and dotted. Light behaves differently on every ring, so the vase shimmers between violet, plum and blue. A tabletop vase for dried lavender or a few slim stems on a shelf or console.

Jade Tendril Curio

3D printable sculpture STL file in polished jade green: an egg-shaped bud cup opens at the top into a jagged, torn rim, with a nest of small curling tendrils inside. Tentacle-like tendrils with fine suction-cup detail wrap the cup and twist down into the stem. The piece stands on a round, stone-textured base, and the smooth jade tones against the gray stone give it the feel of a carved gemstone curio.

Rust Tangle Curio

3D printable sculpture STL file with a weathered rust finish: a tangled ball of looping cords anchors a twisted, braided stem that branches into seven different ends: a lotus flower, an arrowhead, a zigzag coil, a trumpet flower, a textured sphere, a ribbed disc and a trident. The rusted-iron look, darker in the knots and brighter on the raised edges, makes it read like wrought metal. A curious centerpiece for a shelf, desk or studio.

Black Infinity Knot Sculpture

3D printable knot sculpture STL file in matte black: one continuous ribbon loops into an endless knot with three upper loops and interlocking lower curves. Fine grooves run along the length of the ribbon, and the stone-like matte surface absorbs the light so the silhouette stands out sharply. The knot rests on a round, flat base. A minimal modern object for a bookshelf, desk or coffee table.

Teal Disc-Stack Curio

3D printable balance sculpture STL file in satin teal: a stepped, spiral-grooved dome supports a swaying column of thin, tilted discs, each leaning at a slightly different angle. The column ends in a flat top plate holding five textured spheres: smooth, dimpled, spiky, fluted and faceted. The metallic teal finish softens the light across every disc. A playful sculpture for a shelf or side table.

Terracotta Spiral Snail Curio

3D printable snail figurine STL file in matte terracotta: a snail with a deeply coiled, finely grooved shell stretches forward on its foot, eye stalks raised. It sits on a round plinth decorated with a carved scrolling-vine border. The warm clay color and hand-carved texture give it the look of a small museum piece. A charming accent for a shelf, desk or garden room.

Mauve Geometric Stack Curio

3D printable stacking sculpture STL file in matte mauve: eleven different forms stack into a single totem, from a twisted rope ring, a knurled band and a smooth pebble to a faceted ring with an infinity cut-out, a crescent, a wave-textured cushion, a dimpled disc, a ribbed drum, a hexagon and a grid-textured square block on a smooth base ring. Every layer has its own shape and surface, so the eye keeps finding new details. A soft-toned statement piece for a shelf or console.

Silver Breaking Wave Curio

3D printable wave sculpture STL file in polished silver: a breaking wave curls upward into a spiral crest, built from layered bands with different finishes: brushed, stippled, fluted, hammered and mirror-smooth. The contrast between the surfaces makes the wave look as if it is still moving. It stands on a round, stepped base. An elegant desk or shelf sculpture for coastal and modern interiors.

Stone Triple Horn Vase

3D printable three-stem vase STL file in matte stone gray: three horn-shaped stems braid together above a round base and open at different heights into flared mouths: one fluted with a ruffled rim, one tall trumpet with a ring-dot pattern and one covered in scales with a curled lip. The sandy stone texture gives it the feel of cast concrete. Arrange ranunculus, olive branches or dried grasses across the three openings.

Walnut Faceted Origami Curio

3D printable geometric sculpture STL file with a walnut wood finish: angular folded panels cross and interlock into a tall, origami-like tower with diamond-shaped openings, rising from a stepped hexagonal base. Wood grain runs across every facet, giving the sharp geometry a warm, natural feel. Striking on a travertine or oak sideboard, a bookshelf or an entryway console.

Violet Tiered Trumpet Vase

3D printable tiered vase STL file in matte violet: stacked sections, a ribbed foot drum, a fluted cylinder, a scale-covered collar, a spiral-grooved neck and a flared trumpet rim, rise in one continuous form. The color fades from deep violet at the base to soft lavender at the rim. Tall and slender, it suits calla lilies or a few long stems on a sideboard or console.

Bronze Openwork Owl Curio

3D printable owl curio STL file in aged bronze: a perched owl sculpted as an open lattice, its body, wings and tail pierced with rounded organic openings, standing on a gnarled stump base. A heart-shaped facial disc with deep round eyes and a small hooked beak gives it a calm, watchful look, and touches of green patina settle into the recesses like weathered cast metal. In side light the openings throw a dappled shadow pattern onto the wall behind it. A quiet statement piece for a bookshelf, a desk or a mantel.

Brass Spiral Ribbon Floor Lamp

Ivory Textured Column Floor Lamp

Charcoal Wave Tendril Floor Lamp

Amber Leaf Floor Lamp

Midnight Blue Lantern Floor Lamp

Silver Crescent Moon Floor Lamp

Champagne Gold Cage Floor Lamp

Terracotta Tiered Bowl Floor Lamp

Coral Sculpture Floor Lamp

Sage Green Palm Tree Floor Lamp

Honey Badger Figurine

Polar Bear Figurine

Peacock Figurine

Rainbow Lion Figurine

Flamingo Figurine

Black Wolf Figurine

Octopus Figurine

Golden Eagle Figurine

Mermaid Figurine

Winged Unicorn Figurine

Twig Nest Round Wall Mirror

Origami Star Wall Mirror

Red Mosaic Rabbit Wall Mirror

Forest Wildlife Wall Relief

Galaxy Wall Relief

Autumn Landscape Wall Relief

Girl in the Crowd Wall Relief

Anguish Figure Wall Relief

Critique of Capitalism Wall Relief

Battlefield Wall Relief

Coral Reef Wave Relief

Geode Burst Wall Relief

Volcanic Eruption Wall Relief

Phoenix Glass Mosaic Relief

Moon Phases Glass Mosaic

Probabilities of Thought Wall Relief

Twin Peacocks Floral Wall Relief

Honeycomb Queen Bee Wall Relief

Connection Wall Panel

Ant Colony Wall Panel

Ancient Ruin Arch Wall Mirror

Space Explorer Round Wall Mirror

Meal Eaten Alone Wall Relief

Ant-Cicada Figurine

Bremen Town Musicians Figurine

Fox-Crow Figurine

Tree of Life Wall Relief

Gold Melting Drip Wall Mirror

Wise Owl Wall Mirror

Leopard Jungle Wall Mirror

Modern Abstract Wall Panel

Crimson Tree Floor Lamp

Mosaic Crane Figurine

Laughing Panda Figurine

Swan Floor Lamp