New arrivals
View all pieces
Biomechanical Parasitic Curio
3D printable biomechanical vase STL file in frosted emerald green: four twisting tubes spiral around an open, web-like core and rise into jagged and round openings. The lower body carries a raised honeycomb pattern, and four curved claw legs lift the vase off the shelf as if it has just stepped into place. Translucent green lets light pass through the thinner walls and the lattice inside, so the piece changes with every angle. A striking conversation piece for a bookshelf, desk or console.
Torch Bloom Vase
3D printable torch vase STL file with a hammered bronze finish: a faceted, tapering shaft rises from a round base plate to a banded collar, then bursts into torn, flame-shaped petals. The inside of the petals is finished in glossy amber-red, so the opening looks lit from within, especially with an LED tea light inside. Rigid geometry below and wild, flickering edges above make it a bold centrepiece for a mantel, shelf or dining table.
Twisted Spiral Wave Vase
3D printable spiral vase STL file in a glossy cobalt-blue crackle glaze: raised ridges wind around the body like a twisting wave and finish in a slanted, asymmetric rim. A fine crackle pattern runs beneath the gloss, giving the piece the depth of hand-glazed ceramic, and a small foot ring lifts it off the surface. Sized for fresh stems or dried flowers on a shelf, sideboard or bedside table.
Interlocking Gold Ring Vase
3D printable sculptural ring vase STL file in brushed gold: interlocking torus rings, each covered in fine concentric grooves, twist around one another beneath a wide, tilted top disc. A polished inner ring at the centre of the disc forms the opening for a single dried stem. The sculpture stands on a round base plate with small ball feet, and the grooves catch the light differently on every curve. A statement object for a coffee table or bookshelf.
Amethyst Candle Holder
3D printable amethyst crystal candle holder STL file: translucent purple crystal points rise around a central cup, fading from deep violet at the root to pale lavender at the tips. A rough, rocky base scattered with small crystal chips makes the cluster look freshly split from a geode. With an LED pillar candle inside, light glows softly through the crystals. A striking accent for a mantel, dining table or meditation corner.
Burgundy Bloom Cluster Vase
3D printable bud vase STL file in glossy burgundy: a cluster of slender tubes rises from a base of rounded, grape-like beads, each tube ending in its own trumpet-shaped mouth. Between the tubes, an open honeycomb lattice fills the centre and lets light through. Every opening sits at a different height, so single stems and dried flowers fall into a natural, uneven rhythm. The vase stands on a thin round base plate.
Terracotta Twist Candle Holder
3D printable taper candle holder STL file with a glossy terracotta glaze: two sculpted blades twist around each other and meet at a round cup that holds a standard taper candle. The holder stands on a wide drip tray that catches wax. Streaks in the glaze follow the twist like brushwork on hand-made ceramic. A warm, modern piece for a dining table, windowsill or mantel.
Sage Spiral Glass-Insert Vase
3D printable spiral vase STL file in matte sage green: a rippled ribbon winds up from a solid base to a top collar, wrapped around a clear glass cylinder that holds the water. The textured band gives the surface a soft, velvety look, while the glass keeps the stems visible between the turns. Made for tulips and fresh flowers on a table or sideboard. The glass cylinder is not included; the sleeve is sized around a standard cylinder vase.
Amber Figure-Eight Vase
3D printable leaning bud vase STL file in translucent amber: two stacked bulbs form a figure-eight silhouette that tilts to one side on a frosted trapezoid base. The lower bulb carries spiral ribs, the upper bulb is smooth with a single groove band, and the neck ends in a small pouring lip. Light passes through the amber like coloured glass. Perfect for daisies or a few wildflower stems on a shelf or windowsill.
Violet Stacked Ring Vase
3D printable stacked ring vase STL file in metallic violet: tapering rings rise from a wide base to a narrow neck, each with its own surface: brushed, mirror-polished, hammered, fine-ribbed and dotted. Light behaves differently on every ring, so the vase shimmers between violet, plum and blue. A tabletop vase for dried lavender or a few slim stems on a shelf or console.
Jade Tendril Curio
3D printable sculpture STL file in polished jade green: an egg-shaped bud cup opens at the top into a jagged, torn rim, with a nest of small curling tendrils inside. Tentacle-like tendrils with fine suction-cup detail wrap the cup and twist down into the stem. The piece stands on a round, stone-textured base, and the smooth jade tones against the grey stone give it the feel of a carved gemstone curio.
Rust Tangle Curio
3D printable sculpture STL file with a weathered rust finish: a tangled ball of looping cords anchors a twisted, braided stem that branches into seven different ends: a lotus flower, an arrowhead, a zigzag coil, a trumpet flower, a textured sphere, a ribbed disc and a trident. The rusted-iron look, darker in the knots and brighter on the raised edges, makes it read like wrought metal. A curious centrepiece for a shelf, desk or studio.
Black Infinity Knot Sculpture
3D printable knot sculpture STL file in matte black: one continuous ribbon loops into an endless knot with three upper loops and interlocking lower curves. Fine grooves run along the length of the ribbon, and the stone-like matte surface absorbs the light so the silhouette stands out sharply. The knot rests on a round, flat base. A minimal modern object for a bookshelf, desk or coffee table.
Teal Disc-Stack Curio
3D printable balance sculpture STL file in satin teal: a stepped, spiral-grooved dome supports a swaying column of thin, tilted discs, each leaning at a slightly different angle. The column ends in a flat top plate holding five textured spheres: smooth, dimpled, spiky, fluted and faceted. The metallic teal finish softens the light across every disc. A playful sculpture for a shelf or side table.
Terracotta Spiral Snail Curio
3D printable snail figurine STL file in matte terracotta: a snail with a deeply coiled, finely grooved shell stretches forward on its foot, eye stalks raised. It sits on a round plinth decorated with a carved scrolling-vine border. The warm clay colour and hand-carved texture give it the look of a small museum piece. A charming accent for a shelf, desk or garden room.
Mauve Geometric Stack Curio
3D printable stacking sculpture STL file in matte mauve: eleven different forms stack into a single totem, from a twisted rope ring, a knurled band and a smooth pebble to a faceted ring with an infinity cut-out, a crescent, a wave-textured cushion, a dimpled disc, a ribbed drum, a hexagon and a grid-textured square block on a smooth base ring. Every layer has its own shape and surface, so the eye keeps finding new details. A soft-toned statement piece for a shelf or console.
Silver Breaking Wave Curio
3D printable wave sculpture STL file in polished silver: a breaking wave curls upward into a spiral crest, built from layered bands with different finishes: brushed, stippled, fluted, hammered and mirror-smooth. The contrast between the surfaces makes the wave look as if it is still moving. It stands on a round, stepped base. An elegant desk or shelf sculpture for coastal and modern interiors.
Stone Triple Horn Vase
3D printable three-stem vase STL file in matte stone grey: three horn-shaped stems braid together above a round base and open at different heights into flared mouths: one fluted with a ruffled rim, one tall trumpet with a ring-dot pattern and one covered in scales with a curled lip. The sandy stone texture gives it the feel of cast concrete. Arrange ranunculus, olive branches or dried grasses across the three openings.
Walnut Faceted Origami Curio
3D printable geometric sculpture STL file with a walnut wood finish: angular folded panels cross and interlock into a tall, origami-like tower with diamond-shaped openings, rising from a stepped hexagonal base. Wood grain runs across every facet, giving the sharp geometry a warm, natural feel. Striking on a travertine or oak sideboard, a bookshelf or an entryway console.
Violet Tiered Trumpet Vase
3D printable tiered vase STL file in matte violet: stacked sections, a ribbed foot drum, a fluted cylinder, a scale-covered collar, a spiral-grooved neck and a flared trumpet rim, rise in one continuous form. The colour fades from deep violet at the base to soft lavender at the rim. Tall and slender, it suits calla lilies or a few long stems on a sideboard or console.
Brass Spiral Floor Lamp
Single hammered-ribbon spiraling through eight rotations wraps around a glowing ivory-white cylindrical shade, finished in brushed brass gold, fully functional as a lit floor lamp. The single ribbon spirals with a steady, even rhythm around the glowing shade, so the brushed brass gold reads as continuous motion rather than a fixed pattern wrapped around a cylinder. Lit from within, the ivory-white shade casts a warm, diffuse glow through the gaps left by the spiraling ribbon.
Ivory Segmented Floor Lamp
Tapering ring segments, ribbed, dimpled, spiral, woven, and hammered, stack into this translucent warm-beige floor lamp, glowing softly from an internal light source. Each of the twelve ring segments carries a distinct surface, ribbed, dimpled, spiral, woven, or hammered, so the tapering stack reads as a slow catalog of texture climbing toward the top. Warm-beige translucency lets the internal light source glow softly through every segment, unifying the varied textures into a single continuous silhouette.
Charcoal Branching Floor Lamp
Undulating column expands and contracts as it rises on this matte charcoal floor lamp, glowing through rings of small perforations before dissolving into 24 thin curling tendrils at the top. The column's expansion and contraction gives it an almost breathing rhythm as it rises, each ring of perforations glowing a little differently depending on how tightly the form has narrowed at that point. At the very top, the column dissolves entirely into 24 thin curling tendrils, softening the silhouette from solid to airborne.
Amber Leaf Floor Lamp
Veined, leaf-like forms spiral around a glowing central core on this warm amber translucent floor lamp, each leaf lit from within by hidden internal LEDs. Each of the seven leaf-like forms spirals around the glowing core at its own angle, so the lamp reads less like a fixed structure and more like foliage caught mid-turn around a light source. Warm amber translucency lets the hidden internal glow bleed through every vein, making each leaf appear lit from deep within itself.
Midnight Blue Tiered Lamp
Three volumes stack and rise from a hexagonal base on this matte midnight-blue floor lamp: a ribbed rectangular tower, a rippled flat disc, and a spiral-grooved cylinder, all glowing from within. Each carries its own distinct silhouette, so the lamp reads as three related but separate forms balanced on the same base. Matte midnight-blue keeps the glow reading as a soft internal presence rather than a bright external highlight.
Silver Crescent Floor Lamp
Interlocking crescent shapes spiral upward around a central axis on this brushed silver floor lamp, each one a different height and finish, from mirror-polished to hammered to stippled, with an internal LED column. That variation in finish, rather than a repeated shape, is what makes the spiral read as a slow gradient of texture climbing the central axis. Brushed silver ties the varied finishes together, while the LED column gives the whole spiral a quiet, glowing core.
Champagne Gold Ring Lamp
Floating rings hover at different heights around a glowing central core on this warm champagne-gold floor lamp, each ring carrying its own surface texture, rising from a stepped circular base. The six floating rings hover at staggered heights around the glowing core, so the lamp reads as a loose constellation rather than a stacked structure, each ring's surface texture catching the light differently as it circles the center. Warm champagne-gold ties the varied ring textures together into one cohesive, softly lit silhouette.
Terracotta Cascade Floor Lamp
Tiered bowls cascade like a fountain around a central glowing column on this matte unglazed terracotta floor lamp, set on a textured stone-toned circular base. The three tiered bowls cascade unevenly around the glowing column, echoing the layered motion of a fountain rather than a rigid, symmetrical stack. Matte unglazed terracotta keeps the surface warm and dry-looking, while the textured stone-toned base grounds the piece visually before the eye travels upward through the cascading bowls.
Coral Sculpture Floor Lamp
Rising from a dark square plinth like a wind-bent branch of coral, this coral sculpture floor lamp twists upward into a cluster of open, lace-like fronds with a weathered charcoal surface. Every frond is pierced with rounded, organic openings, and the warm glow inside spills through them onto nearby walls as a scatter of dappled, leaf-shaped shadows. Deep, smoky tones hold the outer edges while the lit inner surfaces glow soft and pale, so the piece reads as a quiet sculpture by day and a living light installation after dark.
Forest Green Palm Tree Lamp
Rendered as a tall palm tree in matte forest green, this floor lamp's fanning fronds glow warmly at their tips above a textured root base that mimics roots gripping the ground. The fanning fronds spread unevenly from the trunk's crown, each one glowing a little warmer at its tip than at its base, echoing the way real palm fronds catch the last light of day. Matte forest green keeps the trunk and root base grounded and quiet beneath the more animated, glowing canopy above.
Honey Badger Figurine
Caught mid-stride with a cheerful, forward-turned smile, this honey badger figurine carries the signature silvery-grey saddle over a deep matte black underside, rendered with fine sculpted fur detail and thick front claws. Low and sturdy in build, the figure stands planted on all four legs as if it just rounded the corner of the room. Sharp contrast between the grey saddle and black underside gives the piece a bold, graphic silhouette even from across the room.
Polar Bear Figurine
Seated with its paws resting on the floor, this polar bear figurine wears a red Santa hat and carries a warm, cheerful smile, rendered in dense white-to-cream fur detail. Sturdy and rounded in build, the figure holds a centered, front-facing pose that anchors the room corner around it. Soft shading across the crown and shoulders gives the white fur a gentle sense of depth, while the red hat draws the eye straight to the smiling face.
Peacock Figurine
Tail fanned wide behind it, this peacock figurine stands proudly on two slender bronze legs, its head turned slightly to one side beneath a delicate violet crest. Iridescent blue and violet sweep down the long neck into a chest of overlapping emerald scales, while every tail feather shifts from turquoise at the base to gold and copper at the edges. Each feather ends in a glossy sapphire eye ringed in gold, so the whole fan shimmers like enameled metal as the light moves across it. With no base beneath it, the bird rests directly on its feet, letting the open display take over a shelf, console, or mantel.
Rainbow Lion Figurine
Mane swept back as if caught in a strong wind, this vivid multicolored lion figurine stands directly on the ground with a glossy finish and realistic muscle and paw detail. The swept-back mane suggests strong wind or fast motion even though the lion stands planted and still, giving the piece a sense of frozen energy. Vivid multicolor patterning across the coat catches the glossy finish differently depending on the angle, while realistic muscle definition keeps the pose reading as powerful rather than merely decorative.
Flamingo Figurine
Balanced on one leg with the other tucked beneath its body, this vibrant pink-and-coral flamingo figurine curves its neck into a graceful S-shape, glossy-finished and standing directly on the ground with no base. The S-curved neck draws the eye from the single standing leg all the way up to the head, giving the pose a sense of quiet balance despite the asymmetry. Vibrant pink-and-coral tones shift gradually across the body, deepening slightly along the curved neck where the glossy finish catches the most light.
Black Wolf Figurine
Ears perked forward in a confident, alert posture, this matte charcoal-gray wolf figurine stands directly on the ground with a velvety finish and realistic muscle and paw detail. The perked ears and forward lean give the wolf an alert, watchful presence even in a completely still pose. Matte charcoal-gray keeps the coat reading as dense and velvety rather than reflective, while realistic muscle and paw detail across the four-point stance grounds the figure in a sense of coiled, ready energy.
Octopus Figurine
Facing straight ahead with all eight tentacles spread evenly across the floor, this octopus figurine carries a deep teal-blue mantle fading into lighter turquoise tentacles, each one finished with fine sculpted suction cup detail. Rounded and centered in its stance, the figure reads as calm and grounded rather than mid-motion. Soft mottled shading across the mantle and tentacles gives the semi-glossy skin a subtle sense of depth, while the wide, balanced spread anchors the piece naturally into the corner around it.
Golden Eagle Figurine
Fully extended in a dramatic spread, the wings on this deep brown and gold eagle figurine frame a matte finish across a body standing on two legs, its sharp curved talons gripping the ground directly with no base. Fully extended wings give the eagle a dramatic, mid-flight presence even while grounded on its two legs, the sharp curved talons anchoring the pose with visible tension. Deep brown and gold tones shift subtly across the feathers, catching the matte finish differently depending on how each wing curves away from the body.
Mermaid Figurine
Seated gracefully on a weathered natural rock, this vibrant multicolored mermaid figurine has a glossy finish, her hair cascading down and her iridescent scaled tail curling beneath her. Seated on the weathered rock, the mermaid's cascading hair and curling tail draw the eye in two opposite directions at once, giving the pose a relaxed but dynamic feel. Vibrant multicolor scales catch the glossy finish in shifting bands of light, while her hair falls in soft, naturalistic waves down her back.
Winged Unicorn Figurine
Wings fully extended and horn glowing, this vibrant multicolored winged unicorn figurine strikes a powerful pose with a glossy finish, all four legs planted directly on the ground with no base. The fully extended wings and glowing horn give the unicorn a sense of arrested motion, as though caught mid-stride rather than posed still. Vibrant multicolor tones ripple across the glossy coat, deepening along the wing feathers and brightening toward the glowing horn, which draws the eye to the top of the composition first.
Twig Wreath Round Wall Mirror
Twisting twigs weave together into a loose, nest-like wreath around this round wall mirror, some branches pulling away from the frame as if still growing. Tucked among the branches, small turquoise and violet gemstone accents and delicate gold leaves catch the light, while a smooth, warm wooden ring frames the glass itself. Natural brown tones and organic texture make this twig wreath mirror an easy fit for boho, rustic, and earthy interiors, where it reads as much like wall sculpture as a practical mirror.
Origami Wall Mirror
Deep teal folds burst outward from an octagonal wooden frame, shaping a star silhouette that looks as if it were creased by hand from heavy paper. Small origami forms in mustard, coral, violet and mint nestle between the larger folds, adding playful pops of color that circle the glass like a garland. Warm walnut tones on the inner octagon soften the crisp geometry, so this origami mirror brings a cheerful, handcrafted accent to Scandinavian, eclectic, or kid-friendly spaces.
Mosaic Rabbit Wall Mirror
Sitting upright with its long ears raised, this rabbit wall mirror is covered from nose to tail in glossy red mosaic tiles that shimmer like stained glass. Right at the chest, a round mirror is framed by a ring of gold and amber tiles, while curving gold lines trace the haunches and paws. Tiny brass whiskers and bright glass eyes give the rabbit a lively, curious expression, making it a warm, playful accent for a hallway, reading nook, or bohemian living space.
Forest Wildlife Wall Relief
Towering pines, a flowing river, and distant mountains build a dense forest scene in layered relief on this vibrant earth-tone wall piece, with an eagle in flight, a family of deer, and rabbits scattered across the foreground, framed for hanging. The eagle in flight draws the eye upward through the scene, while the family of deer and scattered rabbits hold the viewer's attention lower in the composition, giving the whole relief a sense of layered depth from foreground to distant mountains. Vibrant earth tones shift from warm greens near the river to cooler blues toward the horizon.
Galaxy Wall Relief
Swirling spiral galaxy takes shape in relief on this deep cosmic-toned wall piece, glossy-finished and surrounded by colorful nebulae and floating planets, each with its own distinct surface texture, framed for hanging. The swirling spiral galaxy pulls the eye toward its glossy center, while the surrounding nebulae and floating planets, each with its own distinct texture, keep the outer field visually active rather than empty. Deep cosmic tones shift from warm amber near the galaxy's core to cool violet and blue further out.
Autumn Landscape Wall Relief
Vibrant foliage frames a golden forest scene on this warm autumn-toned wall relief, matte-finished and layered with a winding leaf-covered path, a reflective lake, distant hills, and a warm setting sun, framed for hanging. The winding leaf-covered path leads the eye from the foreground back toward the reflective lake and distant hills, giving the relief a genuine sense of depth rather than a flat, layered scene. Warm autumn tones deepen across the foliage nearest the viewer and soften toward the horizon where the setting sun glows.
Girl In The Crowd Wall Relief
Simplified, faceless figures, more than fifty in all, fill this muted gray and soft-blue wall relief in matte finish, except for a single girl in a bright red raincoat standing out at the center, framed for hanging. The contrast between the muted crowd and her single saturated color carries the entire composition's emotional weight.
Anguish Figure Wall Relief
Powerful female figure is captured mid-anguish in full relief on this deep charcoal and warm flesh-toned wall piece, matte-finished with an organic composition and rough, irregular torn edges. The figure's mid-anguish pose twists through the relief with rough, irregular torn edges rather than a clean outline, so the boundary of the piece itself feels part of the emotional composition. Deep charcoal shadow surrounds the warm flesh tones at the figure's center, concentrating attention on the body's tension rather than its surroundings.
Critique of Capitalism Wall Relief
Wealth is not shared, it is staged. This wall relief hangs a banquet table above eye level, where golden, jewel-toned feasters sit caught mid-celebration, plates piled high, joy raised into the light. Below them, carved in flatter, shadowed relief, kneeling figures hold plates that stay empty, close enough to see the feast, never close enough to reach it. The same warm palette washes over both groups, so color alone never separates abundance from want, only height, depth, and distance do. Framed for hanging, the piece asks plainly who is invited to wealth, and who is only invited to hunger.
Battlefield Wall Relief
Opposing medieval armies clash across a battlefield of over fifty warriors on this deep steel and earth-toned wall relief, matte-finished, with dramatic swirling clouds and distant fires in the background, framed for hanging. Fifty-plus individual warriors clash across the battlefield in dense, overlapping formation, their deep steel tones broken by warmer earth colors where the fighting is thickest. Dramatic swirling clouds and distant fires in the background frame the chaos below, giving the whole scene a sense of scale beyond what the foreground alone would suggest.
Coral Reef Wave Relief
Branching coral, starfish, and sea urchin clusters wrap a wide, wave-shaped wall panel in matte coral-pink and salmon tones, framing a glossy turquoise whirlpool at its center where seahorses drift through carved current lines. Unframed and irregular-edged, sized to command a large stretch of wall. The coral and starfish clusters thin as they near the glossy turquoise whirlpool at the center, where carved current lines suggest real underwater movement.
Geode Burst Wall Relief
Sharp amethyst and quartz crystals erupt from a rough charcoal-gray rock shell, thickening to deep purple at the jagged edges and thinning to pale blue and clear facets around a hollow, geode-like center. Glossy crystal facets contrast sharply against the matte stone surrounding them. Unframed and irregular-edged, built to command a large stretch of wall. The crystals thicken into deep purple at the shell's jagged edges and thin into pale blue near the hollow, geode-like center, giving the piece a sense of natural mineral growth.
Volcanic Eruption Wall Relief
Glowing lava veins thread through a rough charcoal basalt shell, pooling into a deep crater at the center that radiates a warm red-to-yellow inner light. Set against a near-black backdrop for maximum contrast, the compact oval form is built entirely from jagged, naturally broken rock with no smooth border anywhere on its edge. That contrast between the glowing crater and the surrounding darkness gives the piece a sense of heat trapped inside cold, broken stone.
Phoenix Glass Mosaic Relief
Angled glass shards, hundreds of them, catch the light across this wall relief, forming the unmistakable silhouette of a phoenix in flight, golden at the body and deepening to garnet red along its trailing wings and tail. Mounted unframed against a soft neutral backdrop, its jagged, crystalline edges are shaped entirely by the bird's own form rather than any border. Hundreds of individually angled glass shards build the phoenix's silhouette from gold at the body into garnet red at the trailing wings, each facet catching light differently so the bird appears to shimmer rather than sit static.
Moon Phases Glass Mosaic
Lunar phases, from new moon to full and back to crescent, are rendered in faceted silver and indigo glass, held inside a thin dark metal frame and scattered with hundreds of tiny star-like shard fragments. Every surface, from the glowing full moon at center to the smallest speck of glass between the phases, catches its own sharp point of light. Each of the eight lunar phases carries its own faceted tone, so the sequence reads as a genuine progression rather than a repeated pattern, with tiny star-like shards scattered between them.
Probabilities Of Thought Wall Relief
Crowds fill a Tokyo pedestrian square beneath a bank of glowing neon signage, every figure dressed in richly colored coats but topped with a single oversized ivory die, black pip dots catching the gallery light. Framed in dark wood for wall mounting. The crowd's richly colored coats contrast with the uniform ivory dice topping every figure, giving the composition a quiet, uncanny rhythm beneath its surface realism as the nearest figures stand almost fully in the round.
Twin Peacocks Floral Wall Relief
Peacocks stand center on a carved rock, crested heads turned toward each other beneath a golden arch, tail feathers spreading in a wide symmetrical fan of teal, sapphire, and violet down to the base. Copper-gold eye markings catch the light along every feather while pastel lotus and peony blooms curl through the branches surrounding them. Held inside an ornate gold baroque frame with scrollwork corners.
Honeycomb Queen Bee Wall Relief
Worker bees move across a dense field of honeycomb, some tucked into open cells, others paused on the surface with wings raised, honey pooling amber and gold in the fullest cells. One noticeably larger queen bee sits at the center, an attending cluster gathered close around her. The comb carries no frame or straight edge, its outer boundary breaking into whole, half, and broken cells the way a real piece torn from a hive would look.
Connection Wall Panel
Organic, cell-like nodes, dozens of them, spread across this deep teal and warm bronze wall panel, some sitting close together without ever touching, others threaded to their neighbors by delicate bridging filaments. Isolated nodes hold a cool oxidized patina with fine mineral speckling, while connected clusters warm gradually into bronze and amber, as if the bridges carry light between them. Matte cast-stone finish throughout, framed in a clean rectangular border for wall mounting. The bridging filaments give the panel a sense of quiet connection running beneath an otherwise scattered field of nodes, as if mapping relationships rather than simple decoration.
Ant Colony Wall Panel
Branching network of tunnels and chambers spreads across this wide terracotta and sienna wall panel, carved as if cut straight from an underground colony. Winding passages fork and dead-end in every direction, some connecting distant chambers, others leading nowhere, while over a hundred small reddish brown ants cluster thickest in the wider chambers and trail singly along the narrower paths. Fine granular texture across the sandy ochre surface reads like compacted earth, framed in a clean rectangular border for wall mounting. Some passages dead-end abruptly while others connect distant chambers, giving the panel a genuine sense of underground logic rather than a decorative maze.
Ancient Ruin Mirror
Elongated oval mirror set within a partially collapsed stone archway, one side holding an intact, tool-worked column base, the other fractured into loose rubble with exposed oxidized rebar. Weathered travertine and limestone tones with warm ochre plaster staining throughout the frame. The asymmetry between the two sides gives the piece a sense of arrested collapse, as though uncovered mid-excavation rather than designed from the start. Light falls differently across the rough stone and the smooth mirror surface, deepening the contrast between what has crumbled and what still stands intact.
Space Explorer Wall Mirror
Swirls of violet and teal nebula drift across a deep navy galaxy ring, turning this round wall mirror into a small window on outer space. Raised all around the frame, a ringed planet, a blazing rocket, floating astronauts, a lunar lander, a satellite and crescent moons orbit the glass among scattered golden stars. Every object sits in its own relief, so small hands can trace the planets and point out each explorer, making this mirror a joyful centerpiece for a child's bedroom, playroom, or any space-loving corner.
Meal Eaten Alone Wall Relief
One chair is filled tonight, and it is his own. This wall relief carves an elderly man seated alone at a table built for many, elbow propped, chin resting on his hand, gaze lowered in quiet thought. Down both sides, empty plates and folded napkins stretch into the dark, each place setting untouched, waiting for guests long gone. Warm light gathers close around him and fades to cooler shadow toward the table's far ends, so distance itself carries the weight of being alone. Framed in dark wood for hanging.
Ant-Cicada Figurine
Standing together on a wooden staircase step, this figurine group pairs a stiff, scowling ant with a carefree cicada, one arm draped over the ant's shoulder mid-laugh. Deep glossy reddish-brown defines the ant's segmented shell, while warm sandy-olive tones and translucent veined wings set the cicada apart beside it. Contrasting expressions carry the whole piece: irritation on one side, easy amusement on the other, caught in a single shared moment on the step.
Bremen Town Musicians Figurine
Inspired by the Grimm fairy tale, this figurine stacks four singing animals into one joyful tower on a round cobblestone base. Grey and weathered, the donkey carries the group with its head thrown back, while a tan and white hound, a striped tabby with one paw raised, and a proud rooster with spread wings climb above it. Every open mouth points skyward, so the whole piece reads as a single chorus rising from the ground. Warm, naturalistic colors and detailed fur and feather textures make it equally at home on a shelf or as a garden accent.
Fox-Crow Figurine
Perched between the ears of a seated red fox, a glossy blue-black crow leans forward with a wedge of cheese in its beak, holding it just out of reach. Below, the fox rolls its eyes upward with a hopeful, knowing smile, turning the classic Aesop fable into a playful standoff. Rich orange-red fur flows into a crisp white chest and muzzle, while black legs and a bushy white-tipped tail wrapped around the front paws ground the figure directly on the floor. Fine sculpted fur on the fox contrasts with the crow's smooth, iridescent feathers, so the eye travels naturally from the tail tip up to the cheese.
Tree of Life Wall Relief
Roots spreading wide and branches reaching upward, an ancient tree rises through the heart of this wall relief as the anchor of a swirling cosmic scene. Around it, flowing bands curl into spirals and waves, carrying a radiant sun on one side and a crescent moon with scattered stars on the other, as if day and night were orbiting the tree together. Weathered copper, ochre and aged bronze tones ride the raised forms, while deep blue and verdigris green settle into the recesses, giving the whole surface the feel of an old hand-carved artifact. Framed in dark reclaimed wood for hanging.
Circle of People Wall Mirror
Hand in hand, dozens of small figures dance around this round wall mirror, forming an unbroken ring of families, couples and children. Some twirl, some lean into one another, and little ones hold on between the grown-ups, so every section of the frame tells its own small story. Cast in a dark aged bronze finish with warm gold catching the heads and shoulders, the openwork band lets the wall show through between the figures, giving the piece a light, handcrafted feel. It makes a warm, meaningful statement for an entryway, a family living room, or a gathering space.
Wise Owl Wall Mirror
Wings spread wide and amber eyes watching the room, a carved owl wraps itself around this round wall mirror, its body forming the frame and its talons gripping a leafy branch below. Every feather is shaped in warm walnut tones, with bronze-edged plumes sweeping down both sides of the glass. Along the wings and crown, small inlaid stones in turquoise, lapis blue and amber add a jeweled, folk-art richness. It brings a wise, storybook character to a hallway, reading corner, or rustic living space.
Fierce Leopard Wall Mirror
Crouched on top with teeth bared and eyes locked forward, a spotted leopard guards this organic wall mirror as if about to spring from its branch. Below, twisting jungle limbs wrapped in glossy green leaves and leopard-patterned bands curve around a softly wavy glass, while the big cat's long tail drapes down one side of the frame. Warm golden fur and dark rosettes contrast with the deep bark tones, giving the piece bold, wild energy. It makes a dramatic focal point for a safari-inspired living room, a bohemian entryway, or a tropical-themed space.
Modern Abstract Wall Panel
Interlocking arches, stacked blocks and flowing wave bands rise from the wall in several sculpted layers, creating real depth and shadow play. Deep navy, terracotta, ochre gold and bronze tones meet soft cream and charcoal accents, each piece carrying its own surface character from brushed metal sheen to fine grain and woven texture. Set against a slim dark frame outline, the composition deliberately breaks past its edges, giving the wall a bold sculptural presence that reads like an abstract landscape in relief.
Crimson Tree Floor Lamp
Twisting upward in two intertwined ribbons, a deep crimson trunk grows into a branching tree of light, each limb ending in a softly glowing frosted globe. Lace-like leaves with cut-out veins sprout between the globes, so once the lamp is switched on, the whole room fills with drifting leaf shadows across the walls. Glossy lacquered red and warm white light turn this piece into a sculptural centerpiece by day and an enchanted forest canopy by night.
Mosaic Crane Figurine
Head raised beneath a crimson crest, this crane figurine stands tall on two slender legs, one wing flung high and the other half open as if about to lift off. Every surface is dressed in hand-set mosaic: turquoise and teal tiles along the long neck and body, patterned millefiori discs across the wings, and gold, coral and cobalt feathers fanning out toward the tips. Dark grout lines trace each piece, so the bird reads like stained glass shaped in the round. Its tall, airy silhouette brings color and movement to a balcony corner, an entryway, or a sunlit living room.
Laughing Panda Figurine
Head thrown back in a wide, happy laugh, this panda figurine sits with its legs stretched forward and a fresh stalk of bamboo gripped in both front paws. Thick black fur on the arms, legs and ears meets a soft cream belly and face, every tuft sculpted so the coat looks warm and fluffy even in stillness. Rounded paw pads turn toward the viewer, while the open mouth and crinkled eye patches give it an easy, infectious good mood. Its relaxed seated pose settles naturally onto a balcony, a garden corner, or a sunny spot beside the sofa.
Swan Floor Lamp
Neck curved into a graceful S and head lifted toward the ceiling, this swan floor lamp spreads its wings wide as if about to take flight, a warm light glowing from within its beak. Ivory plumage layered in soft sculpted feathers darkens gradually to smoky grey and charcoal along the long flight feathers. Below, burnished bronze legs and webbed feet grip a round dark plinth, grounding the upward sweep of the whole figure. Lit or unlit, it reads as a sculpture first, bringing quiet drama to a classic study, a reading corner, or an elegant living room.
Best sellers
The pieces people come back for, one from each category.
Wall Reliefs & Panels
Mirrors
Figurines
Vases & Curios
Floor Lamps
Reliefs that hold a moment
Each wall relief captures a single scene in layered depth. The Phoenix is built from hundreds of angled shards, so it shifts from gold to garnet as you walk past it.
See the wall reliefsFables in 3D
Classic tales from Aesop and the Brothers Grimm, each caught in the one moment everyone remembers.
From file to object
Every design is sold as a print-ready 3D file with a commercial license.
Choose a design
Browse the collection and add the pieces you like to your cart.
Receive the files
Get tested, print-ready STL and OBJ files, split into parts where the size needs it.
Print or have it printed
Print it yourself or send it to a print service. Color, texture and size can be customized on request.